EasyROCK panels attach directly to wood, block or concrete, and can also be applied over brick and stucco (strapping highly recommended) for easy renovation. Begin with our starter strip, then insert the first row of panels, starting from the bottom of your wall. Always work from left to right and from the bottom to the top. Stagger the next row of panels to offset the panel edge. The panels can be cut with standard woodworking tools and attach with our EASY SCREWS (that almost disappear into the product) or non-corrosive 2.5″ decking screws. Screw only into the ship lap edge or grout line. NEVER SCREW INTO THE FACE OF THE STONES! Any screw holes on the ship edges are covered by the next overlapping panel. If screws holes are noticabale in the grout lines, they can be hidden by applying our special EasyRock Grout, which is available in 8 colours and can be mixed to achieve the desired tone. When done, it should look so authentic that even a stone mason cannot tell!
If you are always on the go, inquire at one of our stores or use our installer list to easily find a professional. You may also indicate this by filling in the Request for Quote form
Easy Installation Guide (1 page instruction sheet – simply & easy)
EasyROCK Full Installation Guide (more detail instructions – for the not so handy)